COOLPIX S3000 固件

This?software?is for upgrading the COOLPIX?S3000 firmware from v1.0, v1.1,?and v1.2?to v1.3. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.

Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.

Modifications enabled in this version

• An issue, that in some very rare cases prevented the battery from charging, has been resolved.

How to?verify your cameras current firmware version

If the latest firmware version is already installed on your?S3000 you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the?MENU button?to display the menu screen.??
3. Press the multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.?
4. Highlight Firmware version from the setup menu and press the OK button.
5. The camera's firmware version will be displayed.??
6. Turn off the camera.

Quick Install Guide

This is the quick install guide, for detailed instructions click the link below.

Power the camera from AC adapter unit or use a fully charged battery.

1. Create a new folder with an appropriate name on your computer's hard drive.
2. Download the Windows (.EXE)?or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
3. Run the downloaded file to create a folder called S3000Update which contains the firmware folder.
4. Use a card reader or similar device to copy the?firmware folder to the root directory of a memory card formatted in the camera.
5. Insert the memory card into the camera's memory card slot and turn on the camera.
6. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
7. After the upgrade is complete, turn the camera off and remove the memory card.
8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

?Windows: Detailed Firmware Upgrade instructions

?Mac: Detailed Firmware Upgrade instructions

System Requirements