在線
客服

在線客服服務時間：9:00-19:00

    QQ客服： 聯系我們QQ 443474269

    旺旺客服： 點擊這里給我發消息 點擊這里給我發消息

客服
熱線

18623896844
13264445812
18612707474
7*14小時客服服務熱線

添加
微信

北京風清揚攝影器材微信 風清揚官方微信

打賞
站長

北京風清揚攝影器材微信 感恩支持

松下 固件 GH5S G9 固件升級 更新 update 說明書下載 使用手冊 pdf 免費 操作指南 如何使用 快速上手

松下 固件 GH5S G9 固件升級 更新 update 說明書下載 使用手冊 pdf 免費 操作指南 如何使用 快速上手
更新時間2020/04/28 點擊數 8220 73.60 點我下載

Camera body

ProductSeriesModelVersionDateDownload / Description
Camera bodyGHDC-GH5SVer.1.5
NEW

2020/02/17

Click to the download page
DC-GH5Ver.2.62019/11/19Click to the download page
DMC-GH4Ver.2.72017/09/27Click to the download page
DMC-GH3Ver.1.22013/07/09Click to the download page
DMC-GH2Ver.1.22018/07/25Click to the download page
DMC-GH1Ver.1.32010/05/10Click to the download page
GDC-G9Ver.2.1
NEW

2020/02/17

Click to the download page
DC-G90/G91/G95Ver.1.12019/07/09Click to the download page
DMC-G80/G81/G85Ver.1.42019/07/09Click to the download page
DMC-G7/G70Ver.2.22016/07/20Click to the download page
DMC-G6Ver.1.22014/02/04Click to the download page
DMC-G5Ver.1.12013/07/09Click to the download page
DMC-G3Ver.1.22011/10/12Click to the download page
DMC-G2Ver.1.12010/11/18Click to the download page
DMC-G1Ver.1.52010/05/10Click to the download page
GXDC-GX9Ver.1.42019/07/09Click to the download page
DMC-GX80/GX85Ver.1.32019/11/19Click to the download page
DMC-GX8Ver.2.22016/07/20Click to the download page
DMC-GX7Ver.1.32014/05/22Click to the download page
DMC-GX1Ver.1.12012/01/25Click to the download page
GFDC-GF10/GX880Ver.1.22019/11/19Click to the download page
DC-GF9/GX800/GX850Ver.1.22019/11/19Click to the download page
DMC-GF6Ver.1.22014/02/04Click to the download page
DMC-GF3Ver.1.22011/10/12Click to the download page
DMC-GF2Ver.1.12011/10/05Click to the download page
DMC-GF1Ver.1.22010/05/10Click to the download page
GMDMC-GM5Ver.1.12015/02/09Click to the download page
DMC-GM1Ver.1.12014/04/24Click to the download page

Lens

Joint update service for Four Thirds lenses

This page explains the Joint update service for Four Thirds lenses (including Micro Four Thirds lenses) for Panasonic camera body users, and provides a link to the page explains the same for Olympus camera body users, together with the Panasonic camera body's firmware updates.

The following services are available for improvements on performance, operability, and compatibility in the digital interchangeable lens system camera and lens.

There are 5 cases of firmware update procedures depending on the combination of camera body and lens.

Panasonic

: Panasonic Corporation

OLYMPUS

: OLYMPUS Corporation

SIGMA

: SIGMA Corporation

TAMRON

: TAMRON Corporation

CaseCamera BodyLensUpdate Procedures
1PanasonicPanasonicUpdate using Panasonic camera body
2OLYMPUS
3SIGMA
4TAMRON
5OLYMPUSPanasonicClick here to jump to the Olympus's page explains the procedures for Olympus's camera body users.

Click here for firmware updates for the Professional Camera Recorder.

For Panasonic products listed below, firmware update program is available from each download page.

Micro Four Thirds lenses
ProductSeriesModelVersionDateDownload / Description
LEICA DG LensFixed FocalH-NS043Ver.1.32017/09/27Click to the download page
H-ES200Ver.1.12019/06/06Click to the download page
MacroH-ES045Ver.1.12015/12/08Click to the download page
StandardH-ES12060Ver.1.12017/08/07Click to the download page
TelephotoH-RS100400Ver.1.22017/03/08Click to the download page
LUMIX G LensFisheyeH-F008Ver.1.12011/09/13Click to the download page
MacroH-HS030Ver.1.32018/05/10Click to the download page
Fixed FocalH-H014Ver.1.12011/09/13Click to the download page
H-H020Ver.1.12009/11/25Click to the download page
H-H025Ver.1.12018/05/10Click to the download page
H-HS043Ver.1.22018/05/10Click to the download page
StandardH-FS12032Ver.1.12015/12/08Click to the download page
H-HS12035Ver.1.32015/08/05Click to the download page
H-FS12060Ver.1.22018/05/10Click to the download page
H-FS014042Ver.1.12011/09/13Click to the download page
H-FS014045Ver.1.22009/11/25Click to the download page
H-FS1442AVer.1.12015/08/05Click to the download page
H-PS14042Ver.1.22013/03/28Click to the download page
H-FS14140Ver.1.22016/10/06Click to the download page
H-VS014140Ver.1.42010/12/07Click to the download page
TelephotoH-FS35100Ver.1.22018/05/10Click to the download page
H-HS35100Ver.1.32015/08/05Click to the download page
H-FS45150Ver.1.22015/12/08Click to the download page
H-PS45175Ver.1.32017/04/24Click to the download page
H-FS045200Ver.1.32012/02/29Click to the download page
H-FS100300Ver.1.22012/01/25Click to the download page
Wide-AngleH-F007014Ver.1.12009/11/25Click to the download page
Four Thirds lenses
ProductModelVersionDateDownload / Description
LEICA G LensL-X025Ver.2.12008/10/15Click to the download page

For other maker's lenses except Panasonic, firmware update program is available from each maker's download page.

ProductDownload
Lens and accessariesClick to the Olympus's download page
Lens and accessariesClick to the SIGMA's download page.
Lens and accessariesClick to the TAMRON's download page.
  1. In advance to any lens firmware update, please make sure that your camera body firmware is latest.
  2. Please note that a Four Thirds lens is required to be attached on a lens accessory, in order to update any lens accessory firmware, such as Tele Converter. Any lens accessories can not be updated without attaching a Four Thirds lens on it.
  3. Any Four Thirds lens accessories such as Tele Converter can not be updated on the Mount Adaptor(DMW-MA1) together with G series cameras.

Interface Unit

ProductModelVersionDateDownload / Description
Interface UnitDMW-YAGHVer.1.12015/01/26Click to the download page

When you click below "Click to the download page" then a pop-up window should be shown. If your OS is Mac and using Safari, please refer here to show the pop-up window.

Camera body

ProductSeriesModelVersionDateDownload / Description
Camera bodySDC-S1HVer.1.22020/01/28Click to the download page
DC-S1RVer.1.5
NEW

2020/04/08

Click to the download page
DC-S1Ver.1.5
NEW

2020/04/08

Click to the download page

Lens

Please note that a camera body is required in order to update interchangeable lenses.
Please refer the firmware update workflow from below for each combinations of the L-Mount alliance camera body and lens.

CaseCamera BodyLensUpdate Procedures
1PanasonicPanasonicUpdate using Panasonic camera body
2LEICA
3SIGMA
4LEICAPanasonicClick here to jump to the LEICA's page, which explains the procedures for LEICA camera body users.

For Panasonic products listed below, firmware update program is available from each download page.

ProductSeriesModelVersionDateDownload / Description
LUMIX S LensStandardS-R24105Ver.1.12019/06/06Click to the download page
TelephotoS-R70200Ver.1.12019/06/06Click to the download page

For other maker's lenses except Panasonic, firmware update program is available from each maker's download page.

ProductDownload
Lens and accessariesClick to the LEICA's download page.
  1. Please make sure that your camera body firmware is updated to the latest version first, when updating the lens firmware.
  2. Do not attach lens accessory, such as Tele Converter, when updating the lens firmware.

License Agreement

IMPORTANT-READ CAREFULLY: This LICENSE AGREEMENT ("AGREEMENT") is a legal AGREEMENT between you, a lawful possessor of certain Panasonic product ("Product"), who will be referred to in this AGREEMENT as "Customer" and Panasonic Corporation ("Panasonic") for the use of the Software (defined in Article 1) and this website ("Website").

Article 1 License
Customer is granted the right to download, install and use one copy of the firmware provided through the Website ("Software") on a single Product but only for installation and use in the designated area (if any) of indicated Products.
The Software also includes any software updates, add-on components, and/or supplements that Panasonic may provide to Customer or make available to Customer after the date Customer obtain initial copy of the Software to the extent that such items are not accompanied by a separate software agreement or terms of use.
By installing, copying, downloading, accessing or otherwise using the Software, Customer agrees to be bound by the terms of this AGREEMENT.

Article 2 Restrictions.

a. Customer may not modify, reverse engineer, decompile, or disassemble the Software.

b. Unless otherwise specified, the Software and/or Website is provided for your personal and non-commercial use. Customer may not use the Software and/or Website for commercial purposes nor sell, or otherwise transfer it for value, or provide it to third parties' use whether free of charge or not. Commercial purposes include the use of the Software to create publicly distributed computer software.

c. Customer may not use the Software and/or Website for any purpose that is unlawful or prohibited by this AGREEMENT or any notices on the Website. You may not use the Software and/or Website in any manner that could damage, disable, overburden, or impair any Panasonic server, networks or services.

d. Customer may not permanently or tentatively, or wholly or as a part, transfer any material of Software or Customer rights under this AGREEMENT except in the case of the transfer to the person whom the possession of the Product is transferred and who agrees to abide by all of the terms of this AGREEMENT.

Article 3 Reservation of the Right

a. In all cases all rights and titles, including but not limited to proprietary right, copyright patent, trademark and any other intellectual property right, to the Software remain the property of Panasonic.

b. Customer may not remove, modify or alter any Panasonic's copyright or trademark notice from any part of the Software.

Article 4 Change or Discontinuation of the Service

Panasonic reserves the right (i) to change or discontinue any or all elements of the Website, (ii) to interrupt or discontinue operation of the Website or provision of the Software, and (iii) to update the AGREEMENT, at anytime without prior notice to Customer. Panasonic assumes no responsibility for any harm or loss to Customer that may arise through such change, discontinuation, or interruption.

Article 5 LIMITED WARRANTY AND LIABILITY

THE SOFTWARE and WEBSITE IS PROVIDED "AS-IS" WITHOUT ANY WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO THE GENERAL GUARANTEE OF THE PRODUCT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, Panasonic AND ANY OF ITS AFFILIATED COMPANIES DISCLAIM ALL WARRANTIES AND CONDITIONS, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT, WITH REGARD TO THE SOFTWARE AND WEBSITE. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL Panasonic AND ANY OF ITS AFFILIATED COMPANIES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE OR WEBSITE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Article 6 Export Rules

Customer agrees that the Software will not be shipped, transferred or exported into any country or used in any manner prohibited by the United States Export Administration Act or any other applicable export laws, restrictions or regulations (collectively the "Export Laws"). In addition, if the Software is identified as export controlled items under the Export Laws, Customer represents and warrants that Customer is not a citizen, or otherwise located within, an embargoed nation (including without limitation Iran, Syria, Sudan, Cuba and North Korea) and that Customer is not otherwise prohibited under the Export Laws from receiving the Software. All rights to Use the Software are granted on condition that such rights are forfeited if Customer fails to comply with the terms of this AGREEMENT.

Article 7 Termination

Without prejudice to any of Panasonic's other rights, Panasonic may terminate this AGREEMENT if Customer fails to comply with any of the terms and conditions of this AGREEMENT or loses the possession of the Product. In such event, Customer must cease the use of the Software and Website.

Article 8 Governing Law

This AGREEMENT shall be governed and construed under laws of Japan.

 

 

Download 
 For Windows / For Mac
Downloaded File NameS1___V15.zip
File Size89,702,174 bytes
Compression FormatZIP
Extracted File NameS1___V15.bin
Download
Download

Download

Click here to the procedure for update.

Improvements 
Date/VersionDescription
2020/4/8
Ver.1.5
  1. Expanded media compatibility

- Prograde Digital CFexpress Type B card can be used.

* Learn more
https://panasonic.jp/support/global/cs/dsc/connect/cfe/

  1. Other added functions

- 50p/25p video frame rate option is available on all LUMIX S1 cameras including models for the NTSC broadcast format regions (Japan, North America, Republic of Korea, Taiwan, Republic of the Philippines).

  1. Changed of operating specifications

- To prevent improper operation, touch-control is disabled for [Delete All] operation in playback mode. Only cursor buttons can be used for [Delete All] operation.

Operating Instructions for the Change of Specifications

2020/1/28
Ver.1.4
  1. The flicker during V-Log recording has been improved.
2019/11/19
Ver.1.3
  1. Expanded media compatibility

- CFexpress Type B memory card can be used.

  1. Expanded compatibility with Profoto wireless transmitters

- Profoto wireless transmitters "Air Remote TTL-O/P" and "Profoto Connect-O/P" can be used.

* All functions may not be available depending on the situation.

  1. Improved compatibility with Sigma interchangeable lenses and mount converter

- It is possible to assign function to the Fn buttons of Sigma L-Mount interchangeable lenses.

- When attaching a lens using the Sigma MC-21 mount converter and [Image Stabiizer] > [Lens] is set to ON , Body .I.S.(Image Stabilizer) suppresses roll movement.

  1. Improved compatibility with Panasonic interchangeable lenses

- It is possible to assign functions to the lens’ Fn buttons when the Panasonic LUMIX S PRO 70-200mm F2.8 O.I.S. (S-E70200) is mounted.

  1. Improved AF performance

- It is possible to set [AF+MF] in AFC mode.

- It is possible to set continuous AF on the live view screen in Creative Video mode or in other video recording mode when the video recording area is displayed.

  1. Improved performance of High Speed Video

- It is possible to manually set the exposure according to the video exposure mode (P/A/S/M) in High Speed Video mode.

  1. Other added functions

- It is possible to select the card slot to save the JPEG images developed by in-camera RAW processing.

- [0.5 SEC] has been added for an option of [Duration Time (photo)] in [Auto Review].

- [Forced Flash OFF] can be selected in iA mode.

- [AF Assist Light] has been added to the Focus tab of the [Video] menu.

- [Off (Disable Press and Hold)] can be assigned to the Fn button. It disables operation when the button is long-pressed.

- Fn button can be used for checking aperture effect while the button is pressed.

  1. Other improvements

- There were cases where F value control failed depending on the maximum F value when non-Panasonic L-Mount lens is mounted. This bug has been fixed.

- Luminance level of photos (including 6K/4K Photo and Post Focus images) can be set when playing back them over HDMI output.

- AE can be locked with the [AF/AE LOCK] button when ISO Auto is set in M mode.

- Aperture and shutter speed can be controlled using front/rear dials when the rear monitor is set to OFF.

  1. Improved operational stability

- There were cases where Backup Recording using the Double Card Slot Function stopped during writing. This bug has been fixed.

- AF operation following the pressing of [AF-ON] in MF mode was unstable when the LVF Frame Rate was at 120 fps and the camera was under dim lighting. This bug has been fixed.

- There were cases where the images shot vertically did not rotate on playback. This bug has been fixed.

- There were cases where [Image Stabilizer] was set to OFF when the battery was reinserted. This bug has been fixed.

- Operational stability of image stabilizer has been improved. (When [Image Stabilizer] > [E-Stabilization(Video)] and [Boost I.S.(Video)] is ON. )

- There were cases where blue clipping effect occurred in V-Log recording. This problem has been improved.

- There were cases where afterimage occurred in V-Log recording. This problem has been improved.

Operating Instructions for the Change of Specifications

2019/7/9
Ver.1.2
  1. Improved performance of the Image Stabilizer

- The correction performance of the Body Image Stabilizer has been improved from 5.5 stops to 6.0 stops. *1

- The correction performance of the Dual I.S.2 has been improved from 6.0 stops to 6.5 stops. *2 *3

*1 Based on the CIPA standard [Yaw/Pitch direction : focusing distance f=50mm , when S-X50 is used.]

*2 Based on the CIPA standard [Yaw/Pitch direction: focusing distance f=105mm, when S-R24105 is used.]

*3 Based on the CIPA standard [Yaw/Pitch direction : focusing distance f=200mm , when S-R70200 is used.]

  1. Improved AF performance

- [AF-ON: Near Shift] and [AF-ON: Far Shift] functions have been added.
[AF-ON: Near Shift] preferably focuses on a subject nearby while [AF-ON: Far Shift] preferably focuses on a subject far away.

- The tracking performance when using [Tracking] AF mode in video recording has been improved.

- Live view display during auto focusing is now easier to see.

  1. Function Enhancement with Upgrade Software Key DMW-SFU2

An [Activate] function has been added which enables the use of extended functions using the Upgrade Software Key DMW-SFU2.
The following functions will be added by activating the Upgrade Software Key.

- The video recording modes [MOV]

  • 4K60p/50p*, 4:2:0 8bit LongGOP, 150Mbps, LPCM
  • 4K30p/25p*, 4:2:2 10bit LongGOP, 150Mbps, LPCM
  • 4K24p, 4:2:2 10bit LongGOP, 150Mbps, LPCM
  • FHD60p/50p*, 4:2:2 10bit LongGOP, 100Mbps, LPCM
  • FHD30p/25p*, 4:2:2 10bit LongGOP, 100Mbps, LPCM
    1. Improved operational stability

- Operational stability when using an XQD memory card has been improved.

Operating Instructions for the Change of Specifications

2019/4/23
Ver.1.1
  • Improvement of accuracy in exposure during burst shooting.
  • Improvement of accuracy in flash sync performance.

 

 

Download 
 For Windows / For Mac
Downloaded File NameGH5S_V15.zip
File Size77,177,930 bytes
Compression FormatZIP
Extracted File NameGH5S_V15.bin
Download
Download

Download

Click here to the procedure for update.

Improvements 
Date/VersionDescription
2020/2/17
Ver.1.5
  1. Picture freeze may occur at burst recording using an external flash when camera is set to AFC/AFF and LVF frame rate 120fps, has been improved.
2019/11/19
Ver.1.4
  1. Expanded compatibility with Profoto wireless transmitters

- Profoto wireless transmitters "Air Remote TTL-O" and "Profoto Connect-O" can be used.

* All functions may not be available depending on the situation.

  1. Improved AF performance

- [Animal Detect.] has been added to AF mode.

- [AF-ON: Near Shift] and [AF-ON: Far Shift] functions have been added. [AF-ON: Near Shift] preferably focuses on a subject nearby while [AF-ON: Far Shift] preferably focuses on a subject far away.

- Focus Peaking function is available in any AF mode.

- It is possible to set continuous AF on the live view screen in Creative Video mode or in other video recording mode when the video recording area is displayed.

  1. Other added functions

- [AWBw] has been added to WB mode.

- [Highlight Weighted] has been added to metering mode.

- [Exposure Offset Adjust.] has been added to Custom menu, which enables adjustment of the standard exposure value for all metering modes.

- [0.5SEC] has been added for an option of [Duration Time (photo)] in [Auto Review].

  1. Other improvements

- AE can be locked with the [AF/AE LOCK] button when ISO Auto is set in M mode.

- [MODE1] has been added to the Live View Boost function, which increases the frame rate for smooth image display to enable easier manual focusing.

  1. Improved operational stability

- There were cases where Backup Recording using the Double Card Slot Function stopped during writing. This bug has been fixed.

- AF operation following the pressing of [AF-ON] in MF mode was unstable when the LVF Frame Rate was at 120 fps and the camera was under dim lighting. This bug has been fixed.

- There were cases where the images shot vertically did not rotate on playback. This bug has been fixed.

Operating Instructions for the Change of Specifications

2019/7/9
Ver.1.3
  1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

- Smooth aperture control is available during video recording.

- [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

  1. Improved compatibility with the Panasonic Remote Shutter DMW-RS2.

- The video REC switch on the Remote Shutter can be disabled in the camera's custom menu.

  1. Improved operational stability

- There were cases where the exposure was not correct when recording in Creative Video Mode. This bug has been fixed.

- There were cases where the headphone volume did not change in real time when [Headphone Volume] registered in "My Menu" has been changed. This bug has been fixed.

Operating Instructions for the Change of Specifications

2018/10/23
Ver.1.2
  1. Improvement of AF performance

- There were cases where focus point was shifted to the background while tracking the subject in AFC mode. The new firmware minimizes this problem.

- There were cases where focus point was shifted to the background while tracking the subject in video recording. The new firmware minimizes this problem.

  1. Improvement of stability during HDMI output

- Operating stability during VFR(Variable Frame Rate) recording through HDMI output has been improved.

  1. Improvement of video recording performance

- [One Push AE] failed to operate when [SS/Gain Operation] is set to [ANGLE/ISO] while shooting in Creative Video M mode. This bug has been fixed.

- The image quality when using [V-LogL] for VFR recording in Creative Video mode has been improved.

- The image quality when set to [i.Dynamic (Intelligent Dynamic Range Control)] has been improved.

  1. Improvement of operation under specific lighting conditions (fluorescent lights, etc.)

- There were cases where the camera did not catch up to the brightness change smoothly under specfic lighting conditions such as fluorescent lights. The new firmware minimizes this problem.

2018/05/30
Ver.1.1
  1. Improvement of AF performance

- AF performance of photo shooting under lowlight, low-contrast environment has been improved.

- AF speed at 180d (180°) has been improved when displaying the shutter speed in degrees in [SS/Gain Operation]>[ANGLE/ISO].

  1. Improvement of sound recording performance

- Sound quality has been improved by optimizing the noise reduction performance of internal noise cancelling microphone.

  1. New functions

- [L.Monochrome D] has been added to Photo Style.

- [Grain Effect] can be added and adjusted in Photo Style.

- [Focus Ring Lock] has been added to [Custom] menu, which disables focus ring operation to lock the focus.

- [WB/ISO/Expo. Button] has been added, which enables adjustment of WB/ISO/Exposure only while the exposure compensation button is pressed. This can be set [Custom]>[Operation].

- [Dial] has been added to [Custom]>[Operation Lock Setting].

  1. Other Improvements

- [Focus Ring Lock], [E-Stabilization(Video)], [Sound Rec Level Disp.] and [L.Monochrome D] can be assigned to the Fn button that works in recording mode.

- Vector Scope can be displayed on the screen while adjusting white balance.

- It is possible to choose images from group display such as burst shots in [RAW Processing] mode.

- There were cases where the Image Stabilizer icon was not displayed when switching the settings of Image Stabilizer using the Fn button on the H-ES200 interchangeable lens. This bug has been fixed.

- There were cases where folder name was garbled when connecting wirelessly with Windows10-based PC. This bug has been fixed.

Notice for the Change of Specifications

"LUMIX Tether" Ver.1.3 or higher is required to connect to a camera with Updated firmware.
LUMIX Tether Download Program

 

 

Download 
 For Windows / For Mac
Downloaded File NameG9___V21.zip
File Size77,370,532 bytes
Compression FormatZIP
Extracted File NameG9___V21.bin
Download
Download

Download

Click here to the procedure for update.

Improvements 
Date/VersionDescription
2020/2/17
Ver.2.1
  1. Picture freeze may occur at burst recording using an external flash when camera is set to AFC/AFF and LVF frame rate 120fps, has been improved.
2019/11/19
Ver.2.0
  1. Expanded compatibility with Profoto wireless transmitters

- Profoto wireless transmitters "Air Remote TTL-O/P" and "Profoto Connect-O/P" can be used.

* All functions may not be available depending on the situation.

  1. Improved AF performance

- [Animal Detect.] has been added to AF mode.

- It is possible to switch the subject to focus on by pressing the joystick in [Face/Eye/Body/Animal Detect.] mode.

- [AF-ON: Near Shift] and [AF-ON: Far Shift] functions have been added. [AF-ON: Near Shift] preferably focuses on a subject nearby while [AF-ON: Far Shift] preferably focuses on a subject far away.

- Focus Peaking function is available in any AF mode.

- It is possible to set continuous AF on the live view screen in Creative Video mode or in other video recording mode when the video recording area is displayed.

  1. Enhanced video functions

- 4K 30p/25p 4:2:2 10-bit internal recording is supported.

- 4K 60p/50p 4:2:2 10-bit HDMI output is supported.

- Luminance level for 10-bit video is supported.

- VFR (Variable Frame Rate) shooting is supported.

- HDR video recording is supported.

- V-Log L recording and Waveform Monitor (WFM) are available with the Upgrade Software Key DMW-SFU1(sold separately).

  1. Other added functions

- [MODE2] has been added to High Resolution mode, which reduced subject's motion blur.

- [AWBw] has been added to WB mode.

- [Highlight Weighted] has been added to metering mode.

- [Exposure Offset Adjust.] has been added to Custom menu, which enables adjustment of the standard exposure value for all metering modes.

- [0.5SEC] has been added for an option of [Duration Time (photo)] in [Auto Review].

  1. Other improvements

- AE can be locked with the [AF/AE LOCK] button when ISO Auto is set in M mode.

- [MODE1] has been added to the Live View Boost function, which increases the frame rate for smooth image display to enable easier manual focusing.

  1. Improved operational stability

- There were cases where Backup Recording using the Double Card Slot Function stopped during writing. This bug has been fixed.

- AF operation following the pressing of [AF-ON] in MF mode was unstable when the LVF Frame Rate was at 120 fps and the camera was under dim lighting. This bug has been fixed.

- There were cases where the images shot vertically did not rotate on playback. This bug has been fixed.

- Operational stability of image stabilizer has been improved. (When [Image Stabilizer] > [E-Stabilization(Video)] and [I.S. Lock(Video)] is ON. ).

Operating Instructions for the Change of Specifications

2019/7/9
Ver.1.3
  1. Improved compatibility with the Panasonic LEICA DG VARIO-SUMMILUX 10-25mm / F1.7 ASPH. (H-X1025) digital interchangeable lens.

- Smooth aperture control is available during video recording.

- [Aperture Ring Increment] has been added with which users can choose the control method of the aperture ring from [SMOOTH] or [1/3EV] in photo shooting.

  1. Improved compatibility with the Panasonic Remote Shutter DMW-RS2.

- The video REC switch on the Remote Shutter can be disabled in the camera's custom menu.

  1. Improved operational stability

- There were cases where the headphone volume did not change in real time when [Headphone Volume] registered in "My Menu" has been changed. This bug has been fixed.

Operating Instructions for the Change of Specifications

2018/10/23
Ver.1.2
  1. Improvement of AF performance

- There were cases where focus point was shifted to the background while tracking the subject in AFC mode. The new firmware minimizes this problem.

- There were cases where focus point was shifted to the background while tracking the subject in video recording. The new firmware minimizes this problem.

  1. Improvement of operation under specific lighting conditions (fluorescent lights, etc.)

- There were cases where the camera did not catch up to the brightness change smoothly under specfic lighting conditions such as fluorescent lights. The new firmware minimizes this problem.

2018/05/30
Ver.1.1
  1. Improvement of AF performance

- AF tracking performance in video recording has been improved.

  1. Improvement of Body I.S.(Image Stabilizer) performance

- There were cases where peripheral distortion occurred in video recording while walking when used with Panasonic wide zoom lenses (H-F007014, H-E08018). This bug has been fixed.

* When [E-Stabilization (Video)] is set to [ON].

  1. Improvement of High Resolution Mode

- Performance of motion correction has been improved.

- Minimum F11 aperture can be used.

- There were cases where the High Resolution Mode is force-quit when switching to playback mode. This bug has been fixed.

  1. Improvement of sound recording performance

- Sound quality has been improved by optimizing the noise reduction performance of internal noise cancelling microphone.

  1. New functions

- [L.Monochrome D] has been added to Photo Style.

- [Grain Effect] can be added and adjusted in Photo Style.

- [Live View Boost] has been added, which makes it easy to check the composition on the monitor in low-light environment.

- Maximum 20x enlarged view is available in [MF Assist].

- [Focus Ring Lock] has been added to [Custom] menu, which disables focus ring operation to lock the focus.

- [WB/ISO/Expo. Button] has been added, which enables adjustment of WB/ISO/Exposure only while the exposure compensation button is pressed. This can be set [Custom]>[Operation].

- [Dial] has been added to [Custom]>[Operation Lock Setting].

  1. Other improvements

- [Focus Ring Lock], [E-Stabilization(Video)], [Mic Rec Level Disp.], [Live View Boost],and [L.Monochrome D] can be assigned to the Fn button that works in recording mode.

- It is possible to choose images from group display such as burst shots in [RAW Processing] mode.

- Restarting time from sleep mode has been shortened while using Image App and Bluetooth connection.
You can choose to shorten the time of remote operation and image transfer or remote shutter control in [Setup]>[Bluetooth]>[Returning from Sleep Mode].

- There were cases where folder name was garbled when connecting wirelessly with Windows10-based PC. This bug has been fixed.

Notice for the Change of Specifications

"LUMIX Tether" Ver.1.3 or higher is required to connect to a camera with Updated firmware.
LUMIX Tether Download Program

上一篇 松下 固件 S1 1.5 固件升級 更新 update 說明書下載 使用手冊 pdf 免費 操作指南 如何使用 快速上手 下一篇 松下 CX200 UPX360 3.02固件升級 4月24日發布 [ UPDATE ] AG-CX350 / AG-CX200MC / AJ-UPX360MC / AJ-UPX360ED Ver 3.02 P2HD AVC-Intra 200/100/50 format recording a